“Weatherproof”, “waterproof”, “outdoor projector box”: they get used interchangeably, but they are not the same thing. Here is what each one means for a projector that has to live outside, and what to look for before you buy.
See the Defender SeriesFit guide
| What it usually means | Good for | |
|---|---|---|
| Outdoor projector cover | A fabric or plastic cover for when the projector is off | Temporary setups; not for running the projector |
| Outdoor projector box | A housing that shields the projector from rain and sun; cooling and sealing vary widely | Covered spots and mild climates, depending on the box |
| Weatherproof enclosure | Built to handle rain, dust, sun and temperature swings while the projector runs | Permanent outdoor installs |
| “Waterproof” | A marketing word with no single standard; look for a stated protection rating instead | Check the rating, not the label |
An IP (ingress protection) code has two digits. The first is protection against solids such as dust (6 is the highest, dust-tight). The second is protection against water: 5 is water jets, 6 is powerful water jets, and 7 and 8 are for temporary or continuous immersion, which a projector enclosure does not need.
The Defender Series and UST Defender Series provide IP66-equivalent protection against dust and powerful water jets. That is the right target for rain, wind-driven spray and dust.
A projector turns a lot of its power into heat. Seal a running projector inside a box with no way to manage that heat and it can overheat, especially in direct sun. That is the hard part of an outdoor enclosure: keeping water and dust out while still controlling temperature. The Defender Series is climate-controlled for exactly that reason, and it is sized by the projector’s power draw.
| Defender size | Cooling wattage | Takes projectors drawing |
|---|---|---|
| Small | 500 W | 500 W and below |
| Medium | 1,500 W | 1,500 W and below |
| Large | 2,500 W | 2,500 W and below |
| Large Plus | 3,500 W | 3,500 W and below |
| Extra Large | 4,500 W | 4,500 W and below |
Sizing is two steps: match the projector’s power draw to the cooling wattage, then check that the projector physically fits. See the projector enclosure fit guide.
All-weather, climate-controlled, IP66-equivalent. For open-air outdoor installs. Defender Series
For climate-controlled spaces, indoors or covered and conditioned. Not a weatherproof enclosure.
Indoor only: quiet rooms such as home theaters, boardrooms and galleries.
Consumer projection mapping and home displays. HomeLine
We describe it by its protection level: IP66-equivalent protection against dust and powerful water jets, for permanent outdoor installation.
For a covered spot in a mild climate a simple box may be enough. For open-air installs, heat and moisture become the problem, which is what a climate-controlled enclosure is built to handle. A DIY build is possible too; see DIY outdoor projector enclosure: what to plan.
Send us the projector make and model. We match its power draw to the enclosure’s cooling wattage, then check that it physically fits.
Send us your projector make and model and where it will be installed. We will match it to the right enclosure size; custom enclosures are available when a standard size won’t work. Every enclosure has a 1-year warranty.
Request a quoteCall 888-631-5880
ProjectorEnclosure.com is part of Screen Solutions International · ssisales@ssidisplays.com · 20+ years in projection and display.