Weatherproof vs. waterproof projector enclosures

“Weatherproof”, “waterproof”, “outdoor projector box”: they get used interchangeably, but they are not the same thing. Here is what each one means for a projector that has to live outside, and what to look for before you buy.

See the Defender SeriesFit guide
Defender Series outdoor projector enclosure with a projector inside and the door lock shown

The short version

What it usually meansGood for
Outdoor projector coverA fabric or plastic cover for when the projector is offTemporary setups; not for running the projector
Outdoor projector boxA housing that shields the projector from rain and sun; cooling and sealing vary widelyCovered spots and mild climates, depending on the box
Weatherproof enclosureBuilt to handle rain, dust, sun and temperature swings while the projector runsPermanent outdoor installs
“Waterproof”A marketing word with no single standard; look for a stated protection rating insteadCheck the rating, not the label

What an IP rating tells you

An IP (ingress protection) code has two digits. The first is protection against solids such as dust (6 is the highest, dust-tight). The second is protection against water: 5 is water jets, 6 is powerful water jets, and 7 and 8 are for temporary or continuous immersion, which a projector enclosure does not need.

The Defender Series and UST Defender Series provide IP66-equivalent protection against dust and powerful water jets. That is the right target for rain, wind-driven spray and dust.

Why heat matters as much as water

A projector turns a lot of its power into heat. Seal a running projector inside a box with no way to manage that heat and it can overheat, especially in direct sun. That is the hard part of an outdoor enclosure: keeping water and dust out while still controlling temperature. The Defender Series is climate-controlled for exactly that reason, and it is sized by the projector’s power draw.

Defender sizeCooling wattageTakes projectors drawing
Small500 W500 W and below
Medium1,500 W1,500 W and below
Large2,500 W2,500 W and below
Large Plus3,500 W3,500 W and below
Extra Large4,500 W4,500 W and below

Sizing is two steps: match the projector’s power draw to the cooling wattage, then check that the projector physically fits. See the projector enclosure fit guide.

Which ProjectorEnclosure.com series fits where

Defender

All-weather, climate-controlled, IP66-equivalent. For open-air outdoor installs. Defender Series

Integrator

For climate-controlled spaces, indoors or covered and conditioned. Not a weatherproof enclosure.

Hush

Indoor only: quiet rooms such as home theaters, boardrooms and galleries.

HomeLine

Consumer projection mapping and home displays. HomeLine

Questions

Is the Defender waterproof?

We describe it by its protection level: IP66-equivalent protection against dust and powerful water jets, for permanent outdoor installation.

Can I just put my projector in an outdoor box?

For a covered spot in a mild climate a simple box may be enough. For open-air installs, heat and moisture become the problem, which is what a climate-controlled enclosure is built to handle. A DIY build is possible too; see DIY outdoor projector enclosure: what to plan.

How do I pick a size?

Send us the projector make and model. We match its power draw to the enclosure’s cooling wattage, then check that it physically fits.

Not sure which enclosure fits?

Send us your projector make and model and where it will be installed. We will match it to the right enclosure size; custom enclosures are available when a standard size won’t work. Every enclosure has a 1-year warranty.

Request a quoteCall 888-631-5880

ProjectorEnclosure.com is part of Screen Solutions International · ssisales@ssidisplays.com · 20+ years in projection and display.